Setting The Ftp Server Folders - Fujitsu ScanSnap N1800 Operator's Manual

4.12.2 Setting the FTP Server Folders

A list of FTP server folders may be set as [Save] targets for scanned data.
Any FTP server folder can be specified as an FTP server folder.
Up to a combined total of 100 FTP server folders and network folders can be added.
For details about setting network folders, refer to
(page 143).
For details about setting a file name for scanned data to be saved in an FTP server folder,
refer to "4.12.4 Setting a File Name Format for When Saving Scanned Data" (page
ATTENTION
Note the following when registering an FTP server folder.
The FTP server folder is registered as a network path. If the FTP server folder is on a
Windows file server and the length of the full Windows path including the file name exceeds
259 characters, the scan data will not be saved. Before registering an FTP server folder,
check that the length of the full file path+name is not likely to exceed 259 characters.
If the selected folder was created using a language foreign to that of the browsing operating
system, the FTP server folder may not register correctly.
If the name of the FTP server folder contains unrecognizable characters, check the codeset
used.
For FTP path, user name, and password, alphanumeric characters and symbols with the
exception of " \ / : ; * ? " < > | # & % " can be used.
4.12 Setting Folders for Saving Scanned Data
"4.12.1 Setting the Network Folders"
149
Central Admin
Console
157).