Replacing Parts; Part Numbers And Replacement Cycle - Fujitsu ScanSnap N1800 Operator's Manual

7.5

Replacing Parts

7.5.1 Part Numbers and Replacement Cycle

The following table specifies the replacement part numbers and the standard replacement
cycles.
Part name
PAD ASSY
PICK ROLLER
These replacement cycles are rough guidelines for when using 80 g/m
woodfree or wood containing paper. They may vary according to the type of documents
scanned, scanner usage, and cleaning frequency.
ATTENTION
When the consumable alert status is orange or red, contact your scanner administrator to
replace the necessary part.
Use only the PFU parts specified. Do not use consumable parts made by other
manufacturers.
For more details about how to check the consumable alert status, refer to
the Consumable Alert Status" (page 368)
To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner
service provider.
For more details, refer to the following web page:
http://scansnap.fujitsu.com/
Part No.
PA03586-0002
PA03586-0001
.
367

7.5 Replacing Parts

Replacement cycle
After every 50,000 sheets
scanned or once a year
After every 100,000 sheets
scanned or once a year
2
(20 lb) A4/Letter
"7.5.2 Checking