Fujitsu ScanSnap N1800 Operator's Manual page 250

5. Enter an e-mail title into the [Subject] field.
6. Enter the e-mail contents into the [Body] field.
7. When [Request Return Receipt] is available, you can press
whether or not to request a return receipt confirming that the e-mail you
are sending is opened.
HINT
To request a return receipt, contact the administrator.
8. When [Send a copy to my e-mail address] is available, you can press
to select whether or not to specify your own e-mail address as a Bcc
recipient of a copy of the e-mail.
HINT
To send a copy to your e-mail address, contact the administrator.
9. Press the [Scan] button.
When [Scan Viewer] is [Off], this will be a [Scan&Send] button.
The scanning starts.
The scanning status and scan settings are shown during the scan. The maximum
number of pages that can be scanned is 999.
When [Blank Page Skip] is enabled, the number of scanned pages excluding
skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
When the scanning has completed, the [Scan Viewer] window appears.
For details about editing on the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
HINT
If the [Scan&Send] button is selected (when [Scan Viewer] is [Off]), the scanned data is
attached to an e-mail and sent immediately after the scanning is completed, and the
LCD touch panel screen returns to the [Main Menu].
For details, refer to
10. Check the scanned data.
For more details about the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
6.4 Sending the Scanned Data by e-Mail
"6.10 Enabling/Disabling the Scan Viewer" (page
250
339).
"6.11 Editing the
339).
to select
"6.11 Editing the
336).