Checking The Consumable Alert Status - Fujitsu ScanSnap N1800 Operator's Manual

7.5.2 Checking the Consumable Alert Status

1. On the [Main Menu] or [Job Menu] window, press the [Consumable Alert]
button.
HINT
The [Consumables Alert] button on the [Job Menu] window can be shown by pressing
The [Consumable Alert] window appears.
2. Check which part needs to be replaced and press the [OK] button.
Parts whose [Usage Counter] value is bigger than the [Replace at] value should be
replaced.
The value of the [Usage Counter] is in units of 500 sheets scanned.
For details on how to check the status of consumable parts on the administrator
window, refer to
3. Replace the part.
Refer to the following:
Replacing the pad assy
"7.5.3 Replacing the Pad Assy" (page 369)
Replacing the pick roller
"7.5.4 Replacing the Pick Roller" (page 371)
.
"4.14.2 Viewing the Usage Status" (page
368
7.5 Replacing Parts
172).