Fujitsu ScanSnap N1800 Operator's Manual page 125

HINT
For the Admin Tool, there is no [Details] button. The scanner discovery and discovery
ID can be set in the same window.
8. For [Scanner Discovery], select whether to set the scanner as a Scanner
Discovery target for the Central Admin Server.
When targeting the scanner for Scanner Discovery, enter the Discovery ID for the
destination Scanner Central Admin Server in [Discovery ID].
9. Press the [OK] button.
The [Scanner Central Admin Server] window appears.
10. Press the [OK] button.
The information entered is set.
If [Central Admin] is enabled, the scanner information is sent to the Central
Admin Server.
If the process is successful, the text will change to [This scanner's server-side
status is: Registered].
HINT
For details about the settings required to use SSL for communication between the Central
Admin Server and scanner, refer to
When user roaming or job settings are enabled, if communication with the Central Admin
Server is not possible, a confirmation message will appear at login. If the [OK] button is
selected, the settings saved in the scanner are used. Selecting the [Cancel] button returns to
the login window.
4.8 Configuring the Network Settings
"4.8.8 Setting the Admin Connection" (page
125
121).