Operating And Managing Scanners - Fujitsu ScanSnap N1800 Operator's Manual

3.1

Operating and Managing Scanners

The administrator can configure and manage the scanner in the following ways.
LCD touch panel
Scanner settings management can be implemented directly via the scanner's LCD
touch panel.
Setting mode
The administrator can operate the LCD touch panel in the following setting modes.
Basic mode
A setting mode for Administrators with basic knowledge of computers.
Basic required scanner settings can be performed.
Advanced mode
A setting mode for Administrators with advanced knowledge of networks and
servers.
Settings which are more advanced than those of Basic mode, such as,
authentication server, server environment, or advanced scanning settings can be
performed.
For details about the configuration of setting modes, refer to
Setting Mode for the LCD Touch Panel" (page
In addition, using the wizard on the LCD touch panel allows you to configure the
minimum scanner settings required to operate the scanner. You can also use the
wizard to restrict the configurable functions. For details about the configuration with the
wizard, refer to
LCD Touch Panel" (page
Admin Tool
Scanner settings management, and updates can be implemented via the network
interface by using the Admin Tool installed on a computer.
Settings can be performed for one scanner at a time.
Central Admin Console
Scanner settings management, and updates can be implemented via the network
interface by using the Central Admin Console installed on a computer, for multiple
scanners together.
In this case, settings made with the Central Admin Console are applied to scanners via
a Central Admin Server.
For details on Central Admin Console, refer to the Scanner Central Admin User's
Guide.
"4.3 Setting the System Settings with the Installation Wizard on the
85).
63
3.1 Operating and Managing Scanners
"4.4 Configuring the
87).