Setting The Proxy Server - Fujitsu ScanSnap N1800 Operator's Manual

4.8.5 Setting the Proxy Server

Set whether a proxy server is used when connecting to the FTP server or SharePoint
server.
When a proxy server is used for update check, an HTTP proxy server should be set.
1. Select [Network Settings]
The [Proxy Server] window appears.
2. Use the [FTP Proxy Server] option to set whether or not a proxy server is
used for FTP server connection.
ATTENTION
To enable the proxy server setting for each FTP server folder, the [FTP Proxy Server]
setting must be set to [On].
If the [FTP Proxy Server] setting is set to [Off], the proxy server cannot be set for each
FTP server folder in the FTP server folder setting window or the FTP server folder
cannot be accessed.
3. When a proxy server is used, set the address and port number.
ATTENTION
This scanner uses FTP over HTTP to save data in an FTP server folder via a proxy.
Specify the HTTP proxy server address for the FTP proxy server address.
4.8 Configuring the Network Settings
Central Admin
Console
[Basic] [Proxy Server].
116