Pre-Maintenance Preparations - Fujitsu ScanSnap N1800 Operator's Manual

8.6

Pre-Maintenance Preparations

Before sending the scanner for maintenance, the user data store and system settings
should be backed up.
"Backing up the User Data Store" (page 180)
Data Store" (page 178)
"4.15.2 Maintaining the System Settings" (page 182)
After backing them up, refer to the following and delete the user data store and system
settings.
If the hard disk is replaced, all settings will revert to their factory default values.
"Clearing the User Data Store" (page 181)
Store" (page 178)
"To reset system settings to factory defaults, press the [Reset] button for [Reset
system settings to factory defaults and clear logs.]." (page 185)
Maintaining the System Settings" (page 182)
ATTENTION
The user data store may contain private information such as e-mail addresses or fax
numbers, so care should be taken when managing such data.

8.6 Pre-Maintenance Preparations

from "4.15.1 Maintaining the User
from "4.15.1 Maintaining the User Data
413
from "4.15.2