CHAPTER 4 IMAGE PROCESSING SYSTEM
A.
CCD PCB
1.
Removing the CCD PCB
1) Remove the copyboard glass.
2) Move the No. 1 mirror mount to the left
end.
3) Remove the two screws [1], and discon-
nect the connector [2]; then, detach the
original sensor unit (rear) [3].
4) Release the front and rear claws, and de-
tach the CCD cover [4].
4-22
COPYRIGHT © 1999 CANON INC.
[1]
[1]
Figure 4-A401
Figure 4-A402
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[2]
Claw
[4]