Removing The Dimm Of The Image Processor Pcb - Canon GP605 Service Manual

CHAPTER 13 TROUBLESHOOTING
1.

Removing the DIMM of the Image Processor PCB

1) Turn off the main power switch, and disconnect the power cord from the power outlet.
2) Remove the copyboard glass, and detach the small cover of the IP cover by removing the
screw.
3) Open the claws of the slot, and pull off the DIMM as if to lift it at an angle.
Small cover
Screw
Push.
DIMM
Push.
Figure 13-702
13-155
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)