Removing The Hopper - Canon GP605 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
2.

Removing the Hopper

1) Remove the developing assembly from
the copier.
2) Remove the four mounting screws [1],
and disconnect the connector [2]; then,
detach the hopper [3].
6-70
COPYRIGHT © 1999 CANON INC.
Figure 6-E703
[1]
Figure 6-E704
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[1]
[2]
[1]