Separation Claw; Removing The Lower Separation Claw; Separation Claw Assembly - Canon GP605 Service Manual

CHAPTER 8 FIXING SYSTEM
E.

Separation Claw

Assembly
1. Removing the Upper Separation
Claw
1) Slide out the fixing/feeding unit from the
copier.
2) Release the spring [1] used to open the
fixing/delivery assembly; then, detach the
upper separation claw [2].
2. Removing the Lower Separation
Claw
1) Remove the fixing assembly from the
copier.
2) Remove the two screws, and detach the
lower separation claw assembly together
with the support plate.
3) Remove the spring [1] from the lower
separation claw.
4) Remove the three screws [2], and detach
the lower separation claw support plate
[3]; then, detach the separation claw.
8-42
COPYRIGHT © 1999 CANON INC.
[1]
Figure 8-E501
[1]
Figure 8-E502
[2]
Figure 8-E503
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[3]
[2]