Fixing Roller Cleaning Assembly; Removing The Fixing Cleaning; Belt - Canon GP605 Service Manual

B. Fixing Roller Cleaning
Assembly
1.

Removing the Fixing Cleaning

Belt

1) Slide the fixing/feeding unit halfway out;
then, release the stoppers on both rails,
and slide the unit farther out.
2) Remove the pre-transfer charging assem-
bly cover, fixing feeding unit releasing le-
ver, and fixing roller knob.
3) Remove the screw [1], and detach the fix-
ing assembly upper cover [2].
4) Remove the two screws [3] used to secure
the fixing cleaning belt assembly, and
open the top of the fixing cleaning belt as-
sembly upward.
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 FIXING SYSTEM
[1]
Figure 8-B501
[3]
Figure 8-B502
[2]
[3]
8-29