Position Of The Side Paper Deck Pickup Roller Releasing Solenoid; Routing The Manual Feed Tray Assembly Side Guide Timing Belt - Canon GP605 Service Manual

CHAPTER 13 TROUBLESHOOTING

9.9 Position of the Side Paper Deck Pickup Roller Releasing Solenoid

Before removing the deck pickup roller releasing solenoid [1] from the support plate, keep note
of the positions of the two fixing screws [2] of the solenoid with reference to the scale graduations
on the support plate; or, mark the position of the solenoid (of itself) on the support plate with a
scriber.
If you are mounting the solenoid on its own, be sure to secure it in place in its initial position.
10

Routing the Manual Feed Tray Assembly Side Guide Timing Belt

Butt the rack plate of the manual feed tray against section A (open condition).
Move the slide volume into the direction of B, and attach the timing belt to the pulley.
13-32
COPYRIGHT © 1999 CANON INC.
[2]
Figure 13-D218
Timing belt
Rack plate Pulley
Pulley
B
Slide volume
Figure 13-D219
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Section A