Canon GP605 Service Manual page 820

CHAPTER 13 TROUBLESHOOTING
<MISC-R>
Checking the Scanning System
Level 3
Checking the Activation of the Scanning Lamp
SCANLAMP
Operation
1) Select the item to highlight, and press the OK key.
• The scanning lamp will turn on for about 3 sec and
then will turn off.
PRE- Checking the Activation of the Pre-exposure Lamp
EXP Operation
1) Select the item to highlight, and press the OK key.
• The scanning lamp will turn on for about 3 sec and
then will turn off.
<HRD-DISK>
Checking the Operation of the Hard Disk
Level 3
Detecting an Error on/Initializing the Hard Disk
SCANDISK
• The operation starts, and the count is made starting at
0%; the operation ends at 100% (in about 25 min).
FORMAT Initializing the Hard Disk (ends in about 1 sec).
13-228
COPYRIGHT © 1999 CANON INC.
Description
Description
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
COPIER>FUNCTION
Remarks
Remarks
• Execute this mode if the
hard disk has some kind
of problem.
• Execute this mode for a
normal hard disk.
• Execute this mode at
time of shipment from
the factory or after
replacing the hard disk.