Canon GP605 Service Manual page 583

: Clean : Replace
Unit
Photosensitive Photosensitive
drum drum
Slip ring electrode
(for drum heater)
Developing Developing cylinder
assembly
Developing
assembly roll
Cleaner Toner replace the
(rear/front)
Magnet roller
Fixing Inlet guid
assembly
Cleaning belt
Oil receptacle
Thermistor
No. 2 thermistor
Thermal switch
Delivery Separation claw
assembly (upper/lower)
Waste toner
Waste toner case
collecting
mechanism
Pickup/feeding
Transfer guide
assembly
Registration roller
(upper, lower)
Feeding belt
Various feeding
rollers
Duplexing
Duplexing
assembly
horizontal
registration sensor
COPYRIGHT © 1999 CANON INC.
: Oil : Adjust
Part
Instal- every
lation 250,000
Table 12-401-2
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 12 MAINTENANCE AND SERVICING
: Inspect
Intervals
every every every
500,000 750,000 1,000,000
Remarks
Use alcohol and drum
cleaning powder (CK-
0429); for steps, see
B.2. "Work Steps."
Clean the following with
alcohol; then, apply
grease (FY9-6008):
• electrode of the slip
ring
• protrusion of
electrode
• static brush
For details of work,
see item 1 of
B.1."Work."
For details of work,
see item 2 of
B.2."Work."
Remove the slack at
installation.
Check/remove.
12-9