CHAPTER 13 TROUBLESHOOTING
9.6 Position of the Deck (right) Pickup Solenoid (SL7)
Adjust pickup solenoid using the screw [1] so that the distance between the bottom face of the
pickup unit of each holder and the bottom edge of the bushing of the support plate is 34.5 ±0.5 mm
when the plunger of the pickup roller releasing solenoid is pulled as shown (operated as in [1] and
[2]).
[2]
[1]
[1]
[2]
A
Viewed from A
Figure 13-D215
13-29
COPYRIGHT © 1999 CANON INC.
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)