CHAPTER 4 IMAGE PROCESSING SYSTEM
B.
Image Processor PCB
1.
Removing the Image Processor
PCB
1) Remove the copyboard glass.
2) Move the No. 1 mirror mount to the left
edge.
3) Remove the two screws [1], and discon-
nect the connector [2]; then, detach the
original sensor unit (rear) [3].
4) Remove the two screws [4], and detach
the flat cable [5].
4-24
COPYRIGHT © 1999 CANON INC.
[1]
[1]
Figure 4-B401
[5]
Figure 4-B402
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[2]
[4]
[4]