CHAPTER 7 PICK-UP/FEEDING SYSTEM
9.
Removing the Duplexing Reversal
Sensor
1) Remove the duplexing unit from the
copier.
2) Remove the front cover.
3) Remove the motor support plate.
4) Remove the following from the front side
of the reversing roller shaft [1]:
• E-ring [2]
• Gear [3] and parallel pin [4]
• E-ring [5]
• Spacer [6]
• Bearing [7]
5) Remove the following from the rear of the
reversing roller shaft [1]:
• E-ring [8]
• Spacer [9]
• Bearing [10]
7-82
COPYRIGHT © 1999 CANON INC.
[1] [2][3] [4]
Figure 7-F812
Figure 7-F813
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[6] [7]
[5]
[1]
[9]
[10]
[8]