Canon GP605 Service Manual page 589

11) Tighten the screws on the blade retaining
plate in the order indicated.
• Tighten temporarily for screws 1
through 5.
Caution 1:
While the blade is held in place with the
plate, tighten the screws temporarily.
• Tighten fully for screws 6 trough 10.
Caution 2:
When mounting the cleaning blade, be
sure to put the blade auxiliary plate be-
tween the blade support plate and the
blade back plate.
Caution 3:
After mounting the cleaning blade, ro-
tate the drum; if toner slips through the
blade, repeat the foregoing steps. If the
fault is not corrected, replace the blade.
COPYRIGHT © 1999 CANON INC.
CHAPTER 12 MAINTENANCE AND SERVICING
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 12-409
Blade auxiliary plate
Blade support plate
Figure 12-410
Blade back plate
12-15