CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
7.
Removing the Lifter Drive
Assembly (right deck)
Construction
1) Remove the rear cover.
2) Remove the high-voltage transformer
(DC).
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the screw, and loosen the harness
guide [1]; disconnect the two connectors
[2], and remove the four screws [3]; then,
detach the lifter drive assembly (for the
right deck) [4].
9-54
COPYRIGHT © 1999 CANON INC.
[1]
[4]
[3]
Figure 9-D709
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[2]
[2]
[3]