Canon GP605 Service Manual page 536

CHAPTER 11 INSTALLATION
IV . INSTALLING THE CONTROL CARD V
Check to make sure that the image/
memory lamp is off before turning off the
main power switch.
1. Removing the Control Panel
1) Remove the screw (one each), and detach
the two magnet plates from the top of the
control panel.
2) Remove the screw, and detach the pri-
mary charging assembly cover.
11-22
COPYRIGHT © 1999 CANON INC.
Magnet plate
Figure 11-401
Primary charging
assembly cover
Figure 11-402
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Screws
Magnet plate
Screw