Removing The Dust-Collecting; Roller; Removing The Transfer/Separation Charging Assembly - Canon GP605 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
5.

Removing the Dust-Collecting

Roller

1) Remove the pre-transfer charging assem-
bly.
2) Remove the two screws [1], and detach
the motor cover [2].
3) Remove the dust-collecting roller arm [3]
and the twisted spring [4]; then, detach the
dusts-collecting roller [5].
6. Removing the Transfer/
Separation Charging Assembly
1) Open the front cover.
2) Slide out the fixing/feeding assembly.
3) Remove the screw [1], and detach the
charging cover [2].
6-58
COPYRIGHT © 1999 CANON INC.
[2]
Figure 6-B709
[5]
Figure 6-B710
[2]
Figure 6-B711
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[1]
[4]
[3]
[1]