NEC Storage M100 Series User Manual page 184

User Guide
Parameter
iSNS server IP address and port
number list
Add
Edit
Delete
Perform any of the following steps:
 To set the iSNS servers to be monitored by the disk arrays supporting iSCSI, click Add to enter the
necessary information. Then click Next to go on to Finish initialization wizard page.
 To not use the iSNS server, click Next to move on to license unlock procedure.
Release 6.0
Description
Displays the IP address and port number of the iSNS server.
Click this button to add iSNS server information. This
information appears on the iSNS server IP address and
port number list.
Select an iSNS server from iSNS server IP address and
port number list and click Edit to modify the iSNS
information.
Select an iSNS server from iSNS server IP address and
port number list and click Delete to remove the iSNS
server.
184
Chapter 6 Initializing a Disk Array (iSCSI)