Figure 3-3: Rail; Figure 3-4: Attaching Rail To Rear Pole - NEC Storage M100 Series User Manual

User Guide
1. Check the rail (L)
The side with the inner is rear.
The rail (L) looks L-shaped when it is seen from the front side.
Attach the rail to the left side of the rack which is seen from its front side.
2. Align both sides of the bottom of the rail with the 1U delimiting marks on the rear pole of the rack
and then let the two projections on the inner into the holes on the pole.
Release 6.0

Figure 3-3: Rail

Figure 3-4: Attaching Rail to Rear Pole

70
Chapter 3 Installing the Disk Array System