Iscsi Setup Tool - NEC Storage M100 Series User Manual

User Guide
C.2 iSCSI Setup Tool
Run the iSCSI Setup Tool on application servers to configure the iSCSI settings required for the
application server. Before starting this section, you need to install NEC Storage Manager Agent Utility.
For details on how to install, see
1. Starting iSCSI Setup Tool
Click Start > NEC Storage Manager Agent Utility > iSCSI Setup Tool to start iSCSI Setup Tool.
2. Selecting the target disk array unit
Select the serial number of the target disk array unit from the Serial number(S) box.
After selecting or entering the serial number, click OK.
3. When collecting the disk array unit information is successfully completed, the serial number,
controllers, IP addresses of the disk array unit and their connection statuses are displayed.
Release 6.0
Appendix C How to Set/Check Application Server (Windows) (iSCSI)
Section B.1: Installing NEC Storage Manager Agent
337
Utility.