NEC Storage M100 Series User Manual page 281

User Guide
Problem
While a controller failure occurs, it
takes time from 20 minutes to 30
minutes to process the configuration
of the disk array from NEC Storage
Manager Client.
Release 6.0
Cause and Solution
<JRE installation
folder>\lib\security\java.security
------------------------------------------
policy.url.1=file...
policy.url.2=file...
policy.url.<no>=file:${java.home}/lib/secu
rity/nec/iSMClient.policy
------------------------------------------
Specify the next number of described policy.url in where
<no> is.
A controller failure may cause the delay of processes.
Configure the disk array after restoration of the controller.
If you have to configure the disk array while a controller
failure occurs, take the following measure:
 When NEC Storage Manager Express is being used
Configure the disk array by using CLI (Command Line
Interface).
For details of CLI, see NEC Storage Manager Command
Reference.
 When NEC Storage Manager is being used
Remove once the IP address of the faulty controller from
a monitoring target of NEC Storage Manager, and restart
the server.
Add the IP address again after restoration of the
controller, and restart NEC Storage Manager Server.
281
Chapter 10 Troubleshooting
*