User Guide
H.2.1 Executing Rescan
Perform the following steps:
1. Use VI Client to select a server, then select Storage Adapter as the configuration hardware setting.
2. Click Rescan under Storage Adapter.
3. Click Properties in Details.
Release 6.0
Select an available software Initiator from displayed list of available iSCSI software
adapters. This brings up a display of Initiator details such as the model name, IP
address, iSCSI name, detection method, iSCSI alias, and various detected targets.
Figure H-20: Hardware Configuration Screen (1)
Figure H-21: Hardware Configuration Screen (2)
Appendix H How to Set/Check Application Server (VMware) (iSCSI)
418