Installation; Mounting A Disk Array Unit On A Rack; Figure 3-2: Rack Mount Kit; Table 3-1: Components Of Rack Mount Kit - NEC Storage M100 Series User Manual

User Guide

3.2 Installation

3.2.1 Mounting a Disk Array Unit on a Rack

This section describes how to install a disk array unit and a disk enclosure in a rack.



The following describes how to attach the rack mount kit that has come with this disk array system to a
rack:
Release 6.0
Follow the descriptions in Installation Guide.
A disk array unit weighs up to 31Kg (when 3.5-inch hard disk drives are installed). A
disk enclosure weighs up to 29Kg (when 3.5-inch disk drives are installed).
They must be mounted on a rack by two or more persons.
Mount disk enclosure(s) and then a disk array unit from the top of a rack.

Table 3-1: Components of Rack Mount Kit

No. Component name
1 Rail (L)
2 Rail (R)
3 M5 screw
4 Cable clamp
5 Repeat tie
Quantity
1
1
12
4
5

Figure 3-2: Rack Mount Kit

69
Chapter 3 Installing the Disk Array System