Table 1-3: Standby Led (White); Table 1-4: Active/Fault Led (Green/Orange) Of Disk Drive - NEC Storage M100 Series User Manual

User Guide
(2) Service LED
Lit 1 second
Not lit 1 second
Not lit
Not lit
When access to a host connection port is disconnected for five minutes, transition to this
mode takes place automatically to be prepared for power-off. When access from the host
connection port is restored, ordinary status is restored.
(4) Standby LED
Not lit
Lit
(5) Active LED
Not lit
Lit
Flashing
Flashing
Lit
Lit
Release 6.0
Table 1-2: Service LED/Power LED (orange/green) (Contd.)
(3) Power LED
Lit
Lit 0.2 seconds
Not lit 0.2 seconds
Not lit

Table 1-3: Standby LED (white)

Table 1-4: Active/Fault LED (green/orange) of Disk Drive

(6) Fault LED
Not lit
Not lit
Not lit
Flashing
Flashing
Lit
Meaning
Firmware being updated online.
Auto flashing (*) has finished and power can be
turned off.
Powered off.
Status
DC on and off operation is not available
DC on and off operation is available
Status
Powered off.
Ordinary (READY)
Ordinary (in the course of ACCESS)
Recovered
Hard disk drive save-energy mode
Failure
46
Chapter 1 Overview