Figure H-15: General Properties Screen; Figure H-16: Dynamic Discovery Tab In Iscsi Initiator Properties Screen - NEC Storage M100 Series User Manual

User Guide
5. Select the Enabled check box under Status in the General Properties screen. After completing the
settings, click the OK button.
Set up detection address
Set the target detection address so that the software Initiator is able to designate access-enabled
storage resources on the network.
1. Click the Add button under the Dynamic Discovery tab in the iSCSI Initiator Properties screen.

Figure H-16: Dynamic Discovery Tab in iSCSI Initiator Properties Screen

Release 6.0
Appendix H How to Set/Check Application Server (VMware) (iSCSI)

Figure H-15: General Properties Screen

413