Installation - NEC Storage M100 Series User Manual

User Guide
B.1.2 Installation
Use Storage Manager Setup to install the NEC Storage Manager Agent Utility.
Storage Manager Setup starts automatically when the NEC Storage Manager Express Setup and
Utility CD-ROM is set and then you can perform installation as prompted.
The procedure for starting the Storage Manager Setup is:
1. Logon as administrator.
2. Set the CD-ROM of NEC Storage Manager in an application server.
3. The NEC Storage Manager Setup starts automatically. Perform the installation as prompted.
The NEC Storage Manager Setup may not start automatically depending on your system configuration,
in which case, start the following program contained in the CD-ROM:
\INSTALL\WINDOWS\ISMSETUP.EXE
In the case of the environment that a system cannot be restarted, after NEC Storage Manager Agent
Utility is installed, put the following operation into effect.
Start the Services of the Windows Administrative Tools in Control Panel and start the following

services.
NEC Storage Manager Host Agent

NEC Storage Host Register Agent

 When there are a task scheduler, a job scheduling and a command prompt of Windows, which are
already started, restart them.
Release 6.0
Appendix B How to Set/Check Application Server (Windows) (FC/SAS)
After the NEC Storage Manager Agent Utility is installed, the system needs to
be restarted to start the NEC Storage Manager host agent service.
310