Table of Contents
Advertisement
User Guide
Procedure for Mounting a Disk Drive
1. Pull the eject lever on a disk drive until the angle is about 40 degrees.
The eject lever is closed by default on the disk drive.
2. Hold the disk drive steadily and insert it to the middle of the slot in the disk drive unit or a disk
enclosure.
3. With the eject lever on the disk drive open, slowly insert the disk drive until it stops while holding the
eject lever.
4. Press the eject lever into the disk drive to lock the drive.
Release 6.0
Figure 3-14: Inserting Disk Drive
79
Chapter 3 Installing the Disk Array System
Advertisement
Table of Contents
Troubleshooting
