Figure 1-6: Power Supply - NEC Storage M100 Series User Manual

User Guide
1.2.1.3 Power Supply
Label
(1) Power plug
(2) Power cable clamp
(3) Ejector
(4) AC switch
(5) Input Good LED (green)
(6) Fault LED (orange)
Release 6.0

Figure 1-6: Power Supply

Description
Use the power cable shipped together with the disk
array for supplying power to the disk array.
The power cable clamp prevents the power cable
from coming off unintentionally.
The ejector is used to install and remove a power
supply.
The AC switch is used to power on and off input of
power supply.
This LED is lit if power is supplied when the AC
switch is turned on.
This LED is lit when an error is detected.
38
Chapter 1 Overview