User Guide
c. Repeat steps (a) and (b) above for each iSNS server IP address to be registered. When settings
are completed, a screen such as the following is displayed. Click the OK button.
Example: When two iSNS server IP addresses are registered.
d. This gets Initiator information from the application server registered to the iSNS server.
Refer to
iSNS
Server".
Release 6.0
Figure C-21: iSCSI Initiator Properties (Discovery Tab) Screen
Appendix N: "Retrieve Initiator Information on Application Servers Registered with
When using the iSNS server, the Initiator name of the application server must be
directly entered under the Initiator settings in the iSCSI Setup Tool.
Appendix C How to Set/Check Application Server (Windows) (iSCSI)
335