User Guide
F.3 Checking Connection from Application Server
Perform the following steps to connect the application server and disk array in Linux environment.
F.3.1 Logon Steps in Linux Environment
1. Search for target.
# iscsiadm –m discovery –t sendtargets –p <IP address of disk array>
(Example)# iscsiadm -m discovery -t sendtargets -p 192.168.10.64:3260
2. Log on to target.
# iscsiadm –m node -T <iqn of disk array> -p <IP address of disk
array> -l
(Example)# iscsiadm –m node –T
iqn.2001-03.jp.nec:storage01:ist-m000-sn0000000938209213.
wn-0.target0000 -p 192.168.10.64:3260 -l
Release 6.0
Appendix F How to Set/Check Application Server (Linux) (iSCSI)
Log on to the target.
For details, refer to
Section F.3.1: Logon Steps in Linux
Environment.
Confirm the that OS recognizes the logical disk.
For details, refer to
Section F.3.2: Confirmation steps in
Linux
Environment.
Check PathManager settings and status.
For details, refer to
Section F.3.3: Check the
PathManager Settings and
If PathManager will not be used, this step is not
necessary.
397
Status.