Introduction; Operator's Manual; Engine Identification; Specifications - Toro GreensPro 1200 Service Manual

Introduction

This chapter gives information about specifications and
repair of the Honda GX200 gasoline engine used in the
GreensPro 1200. Described adjustments and repairs
require tools that are commonly available in many
service shops.
Some service and repair parts for the engine in your
GreensPro machine are supplied through
Authorized TORO Distributor. Be prepared to provide
your distributor with the TORO model and serial
number of your machine to obtain parts.

Operator's Manual

The Operator's Manual provides information regarding
the operation, general maintenance, and maintenance
intervals for your GreensPro machine. Refer to the
Operator's Manual for additional information when
servicing the machine.

Engine Identification

The engine serial number and type are stamped on the
engine near the oil filler dipstick. The engine serial
number and type will assist in identifying the correct
parts and service information for the Honda engine in
your GreensPro machine.
Gasoline Engine
Detailed information on engine operation, general
maintenance, maintenance intervals, and adjustments
is given in the Honda GX200 Owner's Manual.
Detailed information on engine troubleshooting, testing,
disassembly, and assembly is given in the Honda
Service Manual that is available from Honda. The use
of some specialized tools and test equipment is
explained in the Honda Service Manual. However, the
specialized nature of some engine repairs may dictate
that the work be done at an engine repair facility.
your
When disposing of hazardous waste products, take
them to an authorized disposal site. Waste products
must not be allowed to contaminate surface water,
drains, or sewer systems.
Page 3 - 2 GreensPro 1200