Toro GreensPro 1200 Service Manual page 73

11
Figure 63
8. Thread one of the set screws (10) into the remaining
hole in hub (12), and remove hub, sprocket (13), and
drive chain (11).
16 17 18
Figure 64
9. Remove key (14).
10. Support the drive roller assembly (15).
11. Remove two lock nuts (16), two cap screws (17),
and four flat washers (18).
GreensPro 1200
12
13
10
12. Remove two lock nuts (19), two cap screws (20),
and four flat washers (21) on other side of roller
assembly.
14
15
13. Remove drive roller assembly (15).
Page 5 - 29
19
Figure 65
CAUTION
To prevent personal injury, make sure that drive
roller assembly is supported as it is removed
from the machine. Drive roller assembly weighs
approximately 66 pounds (30 kg).
20 21
15
Chassis