Toro GreensPro 1200 Service Manual page 23

Installation
(Figures 9 through 15.)
NOTE: Machines with
313000000 include an engine that has a different
output shaft and collar than earlier machines. Use the
procedure that matches your engine collar assembly.
1
Figure 9
1. Engine (machine serial number below 313000000)
2. Square key
3. Engine collar
4. Set screw
1. For machines with
313000000, install square key (2) and engine collar (3)
on the engine output shaft, positioning collar the same
distance as noted during removal. Secure the engine
collar by tightening set screw (4).
GreensPro 1200
serial numbers above
2
3
4
serial numbers below
Page 3 - 7
5
Figure 10
5. Engine (machine serial number above 313000000)
6. Square key
7. Engine shaft spacer
8. Engine collar
9. Flat washer
10. Lock washer
11. Socket-head cap screw
2. For machines with
313000000, install engine collar (8), engine shaft
spacer (7), and square key (6) on the engine output
shaft. Secure using socket-head cap screw (11), lock
washer (10), and flat washer (9).
12
Figure 11
3. Install drive coupling (12) using two lock nuts (13),
flat washers (14), and cap screws (15).
6
8
7
9
10
11
serial numbers above
13 14 15
Gasoline Engine