Installation
(Figures 48 through 51.)
1
Figure 48
1. Install cap screw (2) and flat washer (3) to roller
chassis (1).
5
4
9
Figure 49
2. If bushings were removed from steering disc (6),
®
press new Oilite
bushings (4) into steering disc (6).
Then insert pivot bushing (5) into installed Oilite
bushings (4).
3. Install steering spacer bushing (7) and then steering
disc assembly (6) onto cap screw.
GreensPro 1200
2 3
6
7
8
®
Page 5 - 23
6
1
Figure 50
4. Install plated washer (8) and lock nut (9) securing
steering disc (6) to chassis (1).
10
13
Figure 51
5. Secure front linkage arm (10), rear linkage arm (13),
and pivot rod (12) to steering disc assembly (11) (see
Steering Linkages in this section).
6. Lower machine to the ground.
7. Check steering operation and adjust steering
linkages
if
necessary
adjustments in the Adjustments section of this
chapter).
8 9
11
12
(see
Steering
Linkage
Chassis