Transport Wheel - Toro GreensPro 1200 Service Manual

Transport Wheel

Removal
(Figure 72.)
1. Park machine on a clean, level surface with the
transport wheels in the raised and locked position.
Make sure engine is OFF. Remove spark plug wire
from spark plug.
1
Figure 72
2. Remove four lug nuts (1).
3. Remove transport wheel and tire assembly (2).
GreensPro 1200
Installation
(Refer to Figure 72.)
1. Install transport wheel and tire assembly (2) using
four lug nuts (1).
Failure to properly torque wheel lug nuts could
result in failure or loss of wheel and may result
in personal injury.
2. Tighten lug nuts in an alternating pattern to 80 ft-lb
(108 N·m).
3. Adjust tire pressure to 10 psi (0.65 bar).
2
Page 5 - 33
WARNING
Chassis