Installation
(Figures 56 through 58.)
1
2
3
4
Figure 56
1. Install steering head assembly (4) using four cap
screws (1), four lock nuts (2), and eight flat washers (3).
5
8
9
4
Figure 57
2. Connect linkage arm (6) to steering head assembly
(4) using cap screw (5), flat washer (8), spacer (9), and
lock nut (7).
Chassis
1
2
3
6
7
Be careful when removing or installing spring.
The spring is under heavy load and may cause
personal injury.
3. Connect tension spring (10) and anchor screw (11)
to steering head assembly (4) using lock nut (12) and
flat washer (13).
4. Lower machine to the ground.
Page 5 - 26
10
11
12
13
Figure 58
CAUTION
GreensPro 1200
4