Toro GreensPro 1200 Service Manual page 58

13
26
Figure 21
NOTE: Woodruff keys are installed in the upper
steering shaft (13) and steering pivot assembly (25).
Be careful not to lose Woodruff keys during upper
steering shaft and universal joint (26) removal.
9. Loosen two socket head set screws (23) on middle
bearing, and remove middle bearing assembly (22)
from upper steering shaft (13).
10. Loosen cap screw (24) on universal joint (26).
11. Remove upper steering shaft (13) from universal
joint (26).
26
Figure 22
12. Loosen cap screw (27) and remove universal joint
(26) from steering pivot assembly (25).
13. Using a suitable lifting device, raise and support
the machine to allow removal of the steering shaft.
Chassis
22
23
24
25
27
25
Page 5 - 14
25
Figure 23
14. Remove cap screw (29), two flat washers (30), and
lock nut (31), and remove steering pivot rod (28) from
steering pivot assembly (25).
32 33 34
Figure 24
15. Remove two cap screws (32), four flat washers
(33), and two lock nuts (34), and remove steering pivot
assembly (25) from chassis (21).
28
29 30 31
25
21
GreensPro 1200