14 15 16
Figure 5
11. Remove lock nut (14), cap screw (15), and two flat
washers (16) at the bottom of the transmission.
12. Support the transmission.
17 18
25 26
24
22
23
Figure 6
13. Remove nut (20) and flat washer (21).
14. Remove lock nut (18), flat washer (17), cap screw
(24), flat washer (22), pivot bushing (25), two Oilite
bushings (26), and spacer (19), and remove idler arm
assembly (23).
GreensPro 1200
19
20
21
®
Page 4 - 9
31
32
27 28 29
Figure 7
15. Remove the retaining ring (31).
16. Remove three lock nuts (27), three cap screws
(28), and six flat washers (29), and pull transmission
(32) back until the two 8-tooth sprockets (30) are free of
the shaft.
17. Remove transmission (32).
27 28 29
27 28 29
30
Hydraulic System