04 Fault History - ABB ACS150 series User Manual

Actual signals
No. Name/Value
0142 REVOLUTION CNTR
0143 DRIVE ON TIME HI
0144 DRIVE ON TIME LO
0160 DI 1-5 STATUS
0161 PULSE INPUT FREQ
0162 RO STATUS

04 FAULT HISTORY

0401 LAST FAULT
0402 FAULT TIME 1
0403 FAULT TIME 2
0404 SPEED AT FLT
0405 FREQ AT FLT
0406 VOLTAGE AT FLT
0407 CURRENT AT FLT
0408 TORQUE AT FLT
0409 STATUS AT FLT
0412 PREVIOUS FAULT 1
0413 PREVIOUS FAULT 2
0414 DI 1-5 AT FLT
Description
Motor revolution counter (millions of revolutions). The counter can be reset by pressing
the UP and DOWN keys simultaneously when the control panel is in the Parameter
mode.
Drive control board power-on time in days. Counter cannot be reset.
Drive control board power-on time in 2 second ticks (30 ticks = 60 seconds). Counter
cannot be reset.
Status of digital inputs. Example: 10000 = DI1 is on, DI2...DI5 are off.
Value of frequency input in Hz
Status of relay output. 1 = RO is energized, 0 = RO is de-energized.
Fault history (read-only)
Fault code of the latest fault. See chapter
fault history is clear (on panel display = NO RECORD).
Day on which the latest fault occurred.
Format: The number of days elapsed after power-on.
Time at which the latest fault occurred.
Format: Time elapsed after power-on in 2 second ticks (minus the whole days stated by
signal 0402 FAULT TIME 1). 30 ticks = 60 seconds.
For example, value 514 equals 17 minutes and 8 seconds (= 514/30).
Motor speed in rpm at the time the latest fault occurred
Frequency in Hz at the time the latest fault occurred
Intemediate circuit voltage in V DC at the time the latest fault occurred
Motor current in A at the time the latest fault occurred
Motor torque in percent of the motor nominal torque at the time the latest fault occurred
Drive status in hexadecimal format at the time the latest fault occurred
Fault code of the 2nd latest fault. See chapter
Fault code of the 3rd latest fault. See chapter
Status of digital inputs DI1...5 at the time the latest fault occurred. Example: 10000 = DI1
is on, DI2...DI5 are off.
Fault tracing on page 127
Fault tracing on page
Fault tracing on page
Actual signals and parameters
85
for the codes. 0 =
127 for the codes.
127 for the codes.