Output Mode; How To Browse The Monitored Signals - ABB ACS150 series User Manual

Output mode

In the Output mode, you can:
• monitor actual values of up to three group
signal at a time
• start, stop, change direction, switch between local and remote control and set the
frequency reference.
You can transfer to the Output mode by pressing the
text OUTPUT at the bottom.
The display shows the value of one group
OPERATING DATA
right. Page
be monitored in the Output mode. The table below
shows how to view them one at a time.

How to browse the monitored signals

Step Action
1.
66), you can browse them in the Output mode.
If more than one signals have been selected to be monitored (see page
To browse the signals forward, press key
them backward, press key
signal. The unit is shown on the
66 tells how to select up to three signals to
repeatedly. To browse
repeatedly.
01 OPERATING DATA
key until the display shows
01
REM
OUTPUT
REM
OUTPUT
REM
OUTPUT
REM
OUTPUT
63
signals, one
49 1
.
Hz
FWD
Display
49 1
.
Hz
FWD
0 5
A
.
FWD
10 7
.
%
FWD
Control panel