33 Information - ABB ACS150 series User Manual

Parameters in the Long parameter mode
Index Name/Selection
0, x...x
3202 SUPERV 1 LIM LO
x...x
3203 SUPERV 1 LIM HI
x...x
3204 SUPERV 2 PARAM
x...x
3205 SUPERV 2 LIM LO
x...x
3206 SUPERV 2 LIM HI
x...x
3207 SUPERV 3 PARAM
x...x
3208 SUPERV 3 LIM LO
x...x
3209 SUPERV 3 LIM HI
x...x

33 INFORMATION

3301 FIRMWARE
0000...FFFF (hex)
3302 LOADING PACKAGE
2001...20FF hex
3303 TEST DATE
Description
Parameter index in group
SPEED.
0 = not selected.
Defines the low limit for the first supervised signal selected by parameter
3201 SUPERV 1 PARAM. Supervision wakes up if the value is below the
limit.
Setting range depends on parameter
Defines the high limit for the first supervised signal selected by parameter
3201 SUPERV 1 PARAM. Supervision wakes up if the value is above the
limit.
Setting range depends on parameter
Selects the second supervised signal. Supervision limits are defined by
parameters 3205 SUPERV 2 LIM LO and
parameter 3201 SUPERV 1 PARAM.
Parameter index in group
SPEED.
Defines the low limit for the second supervised signal selected by parameter
3204 SUPERV 2 PARAM. Supervision wakes up if the value is below the
limit.
Setting range depends on parameter
Defines the high limit for the second supervised signal selected by parameter
3204 SUPERV 2 PARAM. Supervision wakes up if the value is above the
limit.
Setting range depends on parameter
Selects the third supervised signal. Supervision limits are defined by
parameters 3208 SUPERV 3 LIM LO and
parameter 3201 SUPERV 1 PARAM.
Parameter index in group
SPEED.
Defines the low limit for the third supervised signal selected by parameter
3207 SUPERV 3 PARAM. Supervision wakes up if the value is below the
limit.
Setting range depends on parameter
Defines the high limit for the third supervised signal selected by parameter
3207 SUPERV 3 PARAM. Supervision wakes up if the value is above the
limit.
Setting range depends on parameter
Firmware package version, test date etc.
Displays the version of the firmware package.
For example, 135B hex
Displays the version of the loading package.
2021 hex = ACS150-0nE-
2022 hex = ACS150-0nU-
Displays the test date.
Date value in format YY.WW (year, week)
01 OPERATING DATA. For example, 102 =
3201 SUPERV 1 PARAM setting.
3201 SUPERV 1 PARAM setting.
3206 SUPERV 2 LIM HI. See
01 OPERATING DATA. For example, 102 =
3204 SUPERV 2 PARAM setting.
3204 SUPERV 2 PARAM setting.
3209 SUPERV 3 LIM HI. See
01 OPERATING DATA. For example, 102 =
3207 SUPERV 3 PARAM setting.
3207 SUPERV 3 PARAM setting.
Def
0102
-
-
-
-
104
0102
-
-
-
-
105
0102
-
-
-
-
Type
dependent
00.00
Actual signals and parameters
115