ABB ACS150 series User Manual page 124

Parameters in the Long parameter mode
Index Name/Selection
4019 ACT1 MAXIMUM
-1000...1000%
4020 ACT2 MINIMUM
-1000...1000%
4021 ACT2 MAXIMUM
-1000...1000%
4022 SLEEP SELECTION
0 = NOT SEL
1 = DI1
2 = DI2
3 = DI3
4 = DI4
5 = DI5
7 = INTERNAL
-1 = DI1(INV)
-2 = DI2(INV)
-3 = DI3(INV)
-4 = DI4(INV)
-5 = DI5(INV)
Description
Defines the maximum value for the variable ACT1 if an analog input is
selected as a source for ACT1. See parameter
minimum (4018 ACT1 MINIMUM) and maximum settings of ACT1 define how
the voltage/current signal received from the measuring device is converted to
a percentage value used by the process PID controller.
See parameter 4018 ACT1 MINIMUM.
Value in percent
See parameter 4018 ACT1 MINIMUM.
See parameter 4018 ACT1 MINIMUM.
See parameter 4019 ACT1 MAXIMUM.
See parameter 4019 ACT1 MAXIMUM.
Activates the sleep function and selects the source for the activation input.
No sleep function selected
The function is activated/deactivated through digital input DI1. 1 = activation,
0 = deactivation.
The internal sleep criteria set by parameters
4025 WAKE-UP DEV are not effective. The sleep start and stop delay
parameters 4024 PID SLEEP DELAY and
effective.
See selection 1 (DI1).
See selection 1 (DI1).
See selection 1 (DI1).
See selection 1 (DI1).
Activated and deactivated automatically as defined by parameters
SLEEP LEVEL and 4025
The function is activated/deactivated through inverted digital input DI1.
1 = deactivation, 0 = activation.
The internal sleep criteria set by parameters
4025 WAKE-UP DEV are not effective. The sleep start and stop delay
parameters 4024 PID SLEEP DELAY and
effective.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
4016
4023 PID SLEEP LEVEL and
4026 WAKE-UP DELAY are
WAKE-UP DEV.
4023 PID SLEEP LEVEL and
4026 WAKE-UP DELAY are
Def
100%
ACT1 INPUT. The
0%
100%
0 = NOT SEL
4023 PID
Actual signals and parameters
123