How To Select The Monitored Signals - ABB ACS150 series User Manual

66
Step Action
6.
Use keys
changed the parameter value,
• To save the displayed parameter value, press
• To cancel the new value and keep the original, press

How to select the monitored signals

Step Action
1.
You can select which signals are monitored in the Output mode and how
they are displayed with group
65 for detailed instructions on changing parameter values.
By default, the display shows:
0105 TORQUE.
To change the default signals, select from group
to three signals to be browsed.
Signal 1: Change the value of parameter
index of the signal parameter in group
the parameter without the leading zero), for example, 105 means
parameter 0105
Repeat for signals 2
PARAM). For example, if
PARAM = 0, browsing is disabled and only the signal specified by
SIGNAL2 PARAM appears on the display. If all three parameters are set to
0, that is no signals are selected for monitoring, the panel displays text
"n.A.".
2. Specify the decimal point location, or use the decimal point location and
unit of the source signal (setting 9 [DIRECT]). For details, see parameter
3404 OUTPUT1 DSP FORM.
Signal 1: parameter
Signal 2: parameter
Signal 3: parameter
3. Select the units to be displayed for the signals. This has no effect if
parameter 3404/3411/3418
parameter 3405
Signal 1: parameter
Signal 2: parameter
Signal 3: parameter
4.
Select the scalings for the signals by specifying the minimum and
maximum display values. This has no effect if parameter
set to 9 (DIRECT). For details, see parameters
3407 OUTPUT1 MAX.
Signal 1: parameters
Signal 2: parameters
Signal 3: parameters
Control panel
and to select the parameter value. When you have
SET starts flashing.
34 PANEL DISPLAY
0103 OUTPUT FREQ,
3401
01 OPERATING DATA
TORQUE. Value 0 means that no signal is displayed.
(3408 SIGNAL2 PARAM) and 3
3401 SIGNAL1 PARAM = 0 and
3404 OUTPUT1 DSP FORM
3411 OUTPUT2 DSP FORM
3418 OUTPUT3 DSP FORM.
is set to 9 (DIRECT). For details, see
OUTPUT1 UNIT.
3405 OUTPUT1 UNIT
3412 OUTPUT2 UNIT
3419 OUTPUT3 UNIT.
3406 OUTPUT1 MIN and
3413 OUTPUT2 MIN and
3420 OUTPUT3 MIN and
.
.
parameters. See page
0104 CURRENT and
01 OPERATING DATA up
SIGNAL1 PARAM to the
(= number of
(3415 SIGNAL3
3415 SIGNAL3
3408
3404/3411/3418
3406 OUTPUT1 MIN and
3407 OUTPUT1 MAX
3414 OUTPUT2 MAX
3421 OUTPUT3 MAX.
Display
12
LOC
SET
PAR
1203
LOC
PAR
Display
103
LOC
SET
PAR
104
LOC
SET
PAR
105
LOC
SET
PAR
LOC
PAR SET
LOC
PAR SET
0
LOC
is
PAR SET
500
LOC
PAR SET
0
.
Hz
FWD
FWD
FWD
FWD
FWD
9
FWD
3
FWD
0
.
Hz
FWD
0
.
Hz
FWD