Huawei SmartLogger2000 User Manual page 171

SmartLogger2000
User Manual
Connecting a 3G Router over a DO Port
When connecting a 3G router, cut off one DC power cable of the router, and connect the cable
to a DO port of the SmartLogger.
Figure 7-58 Connecting one DO port
DO Configuration
After connecting the 3G router to the SmartLogger properly, you can set DO parameters over
the WebUI to enable the external 3G router to automatically reset if the SmartLogger fails to
connect to the NetEco, email server, or FTP server within 30 minutes.
Because of permission restriction, log in as Advanced User. Choose Settings > DO to access
the target page.
Issue 04 (2018-04-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
161